Release Notes

iDRAC6 v3.85.03 7
Resolution
Not applicable.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 8
Description
Using the iDRAC web interface to shut down the XenServer operating system by selecting Graceful Shutdown does
not shut down the server.
Resolution
It is recommended that you use the shutdown menu option in the XenServer console or in the XenCenter
management GUI.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 9
Description
TFTP firmware update from local RACADM does not work after a racresetcfg or if IPv6 addresses are used.
Resolution
Use the firmware RACADM for TFTP firmware update.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 10
Description
When using the Virtual Console that uses the Java plug-in with attached Virtual Media, occasionally when
disconnecting the Virtual Media, the console also closes unexpectedly.
Resolution
Restart the Virtual Console to regain access.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 11
Description
During the SLES 11 installation through the Dell Systems Management Tools and Documentation DVD, if the DVD is
connected through Virtual Media, the image installation may not proceed after the system configuration step. It
displays a warning dialog message similar to the following:
"Empty destination in URL: hd:///install/?device=/dev/sdc1".
Resolution
To continue the installation, delete the question mark ‘?’, refresh the URL and the installation will proceed. This issue
is not seen when using the managed system's local CD/DVD or using the operating system DVD directly instead of
the Dell Systems Management Tools and Documentation DVD.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 12
Description
Sometimes the Virtual Console feature of iDRAC becomes unavailable.