Release Notes

iDRAC6 v3.85.03 10
3. Set SSL Encryption to Auto-Negotiate or 128-bit or higher.
The browser session is terminated.
4. Launch a new browser session and perform the downgrade.
You can also run the following RACADM command and perform the downgrade:
racadm sslencryptionstrength set 0 (or 1)
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 22
Description
Incorrect values listed as Legal Values and Default value for the cfgLdapRoleGroupPRivelege command in the
iDRAC6 Enterprise for Blade Servers Version 3.5 RACADM Reference Guide.
Resolution
The LDAP Role Group Privilege value may vary between 0x00000000 and 0x000001ff. The default value is 0x00.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 23
Description
After configuring the extended schema login, there is a possibility that the login through the extended schema may
fail. This issue may occur if the Active Directory user does not have Administrator privileges.
Resolution
On Kerberos, add “Domain controllers” and “Domain admins”.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 24
Description
Virtual console fails to launch with JAVA plugin jre8u131
Resolution
Use lower version of Java plugins,
Recommend to use Java7u80 or Java8u121
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 25
Description
Racadm config –g cfgRacTuning command through local racadm does not enumerate the attributes of webserver
configurations.
Resolution
Use cfgRacTuning command through Firmware racadm or remote racadm to enumerate the attributes of webserver
configurations.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.