Users Guide

88 Configuring iDRAC6 Enterprise Using the Web Interface
if one Firefox window is open with a Power User logged in and another
window is opened with Administrator privileges, both users will now have
Administrator privileges.
Configuring iDRAC6 NIC
This section assumes that iDRAC6 has already been configured and is
accessible on the network. See "Configure iDRAC6 Networking" on page 35
for help with the initial iDRAC6 network configuration.
Configuring the Network, IPMI, and VLAN Settings
NOTE: You must have Configure iDRAC6 privilege to perform the following steps.
NOTE: Most DHCP servers require a server to store a client identifier token in its
reservations table. The client (iDRAC6, for example) must provide this token during
DHCP negotiation. iDRAC6 supplies the client identifier option using a one-byte
interface number (0) followed by a six-byte MAC address.
1 Click System  iDRAC Settings .
2 Click the Network/Security tab.
The
Network screen is displayed.
3 Configure the Network, IPMI, and VLAN settings as needed. See
Table 5-2, Table 5-3, and Table 5-4 for descriptions of the
Network, IPMI ,
and
VLAN Settings options.
4 Click Apply .
5 Click the appropriate button to continue.
Table 5-1. User Privilege Behavior in Supported Browsers
Browser Tab Behavior Window Behavior
Microsoft IE7 and IE8 From latest session opened New session
Firefox 3 From latest session opened From latest session opened