Users Guide

Configuring iDRAC6 Enterprise 49
For remote file share, the remote RACADM command is
racadm remoteimage.
racadm remoteimage <options>
Options are:
–c ; connect image
–d ; disconnect image
–u <username>; username to access the network share
–p <password>; password to access the network share
–l <image_location>; image location on the network share; use double
quotes around the location
–s ; display current status
CAUTION: All characters including alphanumeric and special characters are
allowed as part of username, password, and image_location except the following
characters: ’ (single quote), ”(double quote), ,(comma), < (less than), and > (greater
than). When using remote file share, the characters listed above are not allowed
as part of the user name, password, and image_location.