Users Guide

Recovering and Troubleshooting the Managed System 385
How can I find
the IP address of
CMC?
From iDRAC6 Web interface:
•Click System  iDRAC Settings  CMC .
CMC IP address is displayed on the CMC
Summary screen.
From the Virtual Console:
• Select the "Dell CMC" console in the OSCAR to log in to CMC
through a local serial connection. CMC RACADM commands
can be issued from this connection. See the
RACADM Command
Line Reference Guide for iDRAC and CMC for a complete list of
CMC RACADM subcommands
$ racadm getniccfg -m chassis
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.35.155.151
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.35.155.1
Speed = Autonegotiate
Duplex = Autonegotiate
NOTE: The above action can also be performed with remote
RACADM.
iDRAC6 network
connection is
not working.
• Ensure that the LAN cable is connected to CMC.
• Ensure that NIC settings, IPv4 or IPv6 settings, and either Static
or DHCP is enabled for your network.
I inserted the
server into the
chassis and
pressed the
power button,
but nothing
happened.
• iDRAC6 requires upto 2 minutes to initialize before the server
can power up.
• Check CMC power budget. The chassis power budget may have
exceeded.
Table 19-10. Frequently Asked Questions/Troubleshooting (continued)
Question Answer