Users Guide

Using iDRAC6 Configuration Utility 359
Press <Esc> to exit the System Event Log.
NOTE: You can only clear the SEL in iDRAC6 Configuration Utility or in iDRAC6 Web
interface.
To clear the SEL, select Clear System Event Log and press <Enter>.
When you have finished with the SEL menu, press <Esc> to return to the
previous menu.
Exiting iDRAC6 Configuration Utility
When you have finished making changes to iDRAC6 configuration, press the
<Esc> key to display the Exit menu.
• Select Save Changes and Exit and press <Enter> to retain your changes.
If this operation fails, one of the following message is displayed:
– iDRAC6 Communication Failure—Displayed if iDRAC is not
accessible.
– Some of the settings cannot be applied—Displayed when few settings
cannot be applied.
• Select
Discard Changes and Exit and press <Enter> to ignore any
changes you made.
• Select
Return to Setup and press <Enter> to return to iDRAC6
Configuration Utility.