Users Guide

Using iDRAC6 Configuration Utility 357
Auto–Discovery
(continued...)
Before adding your Dell system to the network and using the
auto–discovery feature, ensure that:
• Dynamic Host Configuration Protocol (DHCP)
server/Domain Name System (DNS) are configured.
• Provisioning Web services is installed, configured, and
registered.
Provisioning Server This field is used to configure the provisioning server. The
provisioning server address can be a combination of IPv4
addresses or hostnames and should not exceed 255 characters.
Each address or hostname should be separated by a comma.
If you have enabled the auto-discovery feature, user
credentials are retrieved from the configured provisioning
server to allow future remote provisioning after the
auto-discovery process has completed successfully.
For more information, see the Dell Lifecycle Controller User
Guide available on the Dell Support website at
dell.com/support/manuals.
Account Access Select Enabled to enable the administrator account.
Select Disabled to disable the administrator account or when
Auto-Discovery is enabled.
IPMI LAN Privilege Select between Admin, User, Operator, and No Access.
Account User Name Press <Enter> to edit the user name and press <Esc> when
you have finished. The default user name is root.
Enter Password Enter the new password for the administrator account.
The characters are not echoed on the display as you enter them.
Confirm Password Re-enter the new password for the administrator account.
If the characters you enter do not match the characters you
entered in the Enter Password field, a message displays and
you must re-enter the password.
Table 18-2. Lan User Configuration Screen
(continued)
Item Description