Users Guide

352 Using iDRAC6 Configuration Utility
DNS Server 1 If DNS Servers from DHCP is Off, enter the IP address of the first
DNS server.
DNS Server 2 If DNS Servers from DHCP is Off, enter the IP address of the
second DNS server.
IPv6 Settings
IPv6 Enable or disable support for the IPv6 connection.
IPv6 Address
Source
Select between AutoConfig and Static. When AutoConfig is
selected, the IPv6 Address 1, Prefix Length, and Default Gateway
fields are obtained from DHCP.
When Static is selected, the IPv6 Address 1, Prefix Length, and
Default Gateway items become editable.
IPv6 Address 1 If the IP Address Source is set to AutoConfig, this field displays the
IP address obtained from DHCP.
If the IP Address Source is set to Static, enter the IP address you
want to assign to iDRAC6.
Prefix Length Configures the Prefix length of the IPv6 address. It can be a value
between 1 an 128, inclusive.
Default Gateway If the IP Address Source is set to AutoConfig, this field displays the
IP address of the default gateway obtained from DHCP.
If the IP Address Source is set to Static, enter the IP address of the
default gateway.
IPv6 Link-local
Address
This is the non-editable IPv6 Link-local Address of iDRAC6
network interface.
IPv6 Address 2-
15
This is the non-editable IPv6 Address 2...IPv6 Address 15 of
iDRAC6 network interface.
DNS Servers
from DHCPv6
Select On to retrieve DNS server addresses from a DHCP service on
the network. Select Off to specify the DNS server addresses below.
DNS Server 1 If DNS Servers from DHCP is Off, enter the IP address of the first
DNS server.
DNS Server 2 If DNS Servers from DHCP is Off, enter the IP address of the
second DNS server.
Table 18-1. LAN Parameters
(continued)
Item Description