Users Guide

344 Deploying Your Operating System Using iVMCLI
Root CA Certificate Validation
-S
This parameter is used to indicate if the iDRAC CA certificate is valid or not.
If the certificate is not valid, the iVMCLI session is terminated and an error
message is displayed indicating the certificate is not valid. If the certificate is
valid, the iVMCLI session is established.
Version Display
-v
This parameter is used to display the iVMCLI utility version. If no other
non-switch options are provided, the command terminates without an error
message.
Help Display
-h
This parameter displays a summary of the iVMCLI utility parameters. If no other
non-switch options are provided, the command terminates without error.
Manual Display
-m
This parameter displays a detailed “man page” for the iVMCLI utility,
including descriptions of all of the possible options.
Encrypted Data
-e
When this parameter is included in the command line, iVMCLI will use an
SSL-encrypted channel to transfer data between the management station and
iDRAC6 in the remote system. If this parameter is not included in the
command line, the data transfer is not encrypted.