Users Guide

Configuring iDRAC6 Enterprise 33
Chassis LCD Panel Use the LCD panel on the chassis containing
iDRAC6 to view the high-level status of the
servers in the chassis. During initial
configuration of CMC, the configuration
wizard allows you to enable DHCP
configuration of iDRAC6 networking.
Local and Remote RACADM The local RACADM command line interface
runs on the managed server.
Remote RACADM is a client utility which runs
on a management station. It uses the
out-of-band network interface to run
RACADM commands on the managed server.
The –r option runs the RACADM command
over a network.
RACADM commands provide access to nearly
all iDRAC6 features. You can inspect sensor
data, system event log records, and the current
status and configuration values maintained in
iDRAC6. You can alter iDRAC6 configuration
values, manage local users, enable and disable
features, and perform power functions such as
shutting down or rebooting the managed
server.
iVMCLI iDRAC6 Virtual Media Command Line
Interface (iVMCLI) provides the managed
server access to media on the management
station. It is useful for developing scripts to
install operating systems on multiple
managed servers.
Table 2-1. Configuration Interfaces
(continued)
Interface Description