Users Guide

Configuring iDRAC6 Enterprise 31
2
Configuring iDRAC6 Enterprise
This section provides information about how to establish access to iDRAC6
and to configure your management environment to use iDRAC6.
Before You Begin
Gather the following items prior to configuring iDRAC6:
• Dell Chassis Management Controller Firmware User Guide
• Dell Systems Management Tools and Documentation
DVD
The Dell Systems Management Tools and Documentation DVD includes the
following components:
• DVD root — Contains the Dell Systems Build and Update Utility,
which provides server setup and system installation information
• SYSMGMT — Contains the systems management software products
including Dell OpenManage Server Administrator
For more information, see the Dell OpenManage Server Administrator
Installation Guide and the Dell OpenManage Management Station Software
Installation Guide available on the Dell Support website at
dell.com/support/manuals.
Interfaces for Configuring iDRAC6
You can configure iDRAC6 using iDRAC6 Configuration Utility, iDRAC6
Web interface, Chassis Management Controller (CMC) Web interface,
Chassis LCD Panel, the local and remote RACADM CLI, iVMCLI, or the
SM-CLP CLI. The local RACADM CLI is available after you have installed
the operating system and the Dell OpenManage software on the managed
server. Table 2-1 describes these interfaces.