Users Guide

Configuring the vFlash SD Card and Managing vFlash Partitions 251
Viewing Available Partitions
Ensure that the vFlash or standard SD card is enabled to view the list of
available partitions.
To view the available partitions on the card:
1
On the iDRAC6 Web interface, select System  vFlash  Manage
subtab. The Manage Partitions page lists the available partitions.
2 For each partition, you can view the information mentioned in Table 11-5.
Table 11-5. Viewing Available Partitions
Field Description
Index Partitions are indexed from 1 to 16. The partition
index is unique for a particular partition. It is specified
when the partition is created.
Label Identifies the partition. It is specified when the
partition is created.
Size Size of the partition in Megabytes (MB).
Read Only Read-write access state of the partition.
• Checked = Read-only partition.
• Unchecked=Read-write partition
NOTE: For the standard SD card, the partition is read-
write, and this column is not displayed.
Attached Indicates whether the partition is visible to the
operating system as a USB device. To attach or detach
partitions, see the section "Attaching and Detaching
Partition" on page 252.
Ty p e Displays whether the partition type is Floppy, Hard
Disk or CD.