Users Guide

216 Configuring and Using Serial Over LAN
Windows 2003 Enterprise
1 Find out the boot entry ID by entering bootcfg in the Windows command
prompt. Locate the boot entry ID for the section with the OS-friendly
name
Windows Server 2003 Enterprise . Press <Enter> to display the
boot options on the management station.
2 Enable EMS at a Windows command prompt by entering:
bootcfg /EMS ON /PORT COM1 /BAUD 115200 /ID <boot
id>
NOTE: <boot id> is the boot entry ID from step 1.
3 Press <Enter> to verify that the EMS console setting takes effect.
Example of original bootcfg setting:
______________________________________________________________
Boot Loader Settings
--------------------
timeout:30
default:multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
Boot Entries
------------
Boot entry ID: 1
Os Friendly Name: Winodws Server 2003, Enterprise
Path: multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
OS Load Options: /nonexecute=optout /fastdetect /usepmtimer
/redirect
______________________________________________________________