Users Guide

206 Configuring and Using Serial Over LAN
The installation program copies the files to the following locations on Linux
Enterprise Operating Systems:
/etc/init.d/SOLPROXY.cfg
/etc/SOLPROXY.cfg
/usr/sbin/dsm_bmu_solproxy32d
/usr/sbin/solconfig
/usr/sbin/ipmish
Initiating the SOL Proxy session
For Windows 2003
To start the SOL Proxy service on Windows system after installation, you can
reboot the system (SOL Proxy automatically starts on a reboot). Or, you can
start the SOL Proxy service manually by completing the following steps:
1
Right-click My Computer and click Manage .
The
Computer Management window is displayed.
2 Click Services and Applications and then click Services .
Available services are displayed to the right.
3 Locate DSM_BMU_SOLProxy in the list of services and right-click to
start the service.
Depending on the console you use, there are different steps for accessing SOL
Proxy. Throughout this section, the management station where the SOL
Proxy is running is referred as the SOL Proxy Server.
For Linux
The SOL Proxy will start automatically during system startup. Alternatively,
you can go to directory /etc/init.d and use the following commands to
manage the SOL Proxy service:
solproxy status
dsm_bmu_solproxy32d start
dsm_bmu_solproxy32d stop
solproxy restart