Users Guide

Viewing the Configuration and Health of the Managed Server 193
Misc Health
The Misc Health screen provides access to the following system logs:
• System Event Log — Displays system-critical events that occur on the
managed system.
• Post Code — Displays the last system post code (in hexadecimal) prior to
booting the operating system of the managed server.
• Last Crash Screen — Displays the most recent crash screen and time.
• Boot Capture — Provides playback of the last three boot screens.
NOTE: This information is also available at SystemLogs tabSystem Event Log.
System Inventory
The System Inventory page displays the hardware and firmware components
installed on the managed system.
To access the System Inventory page, click System Properties System
Inventory.
The Hardware Inventory section displays the information for components
that include the iDRAC, the RAID controller installed, all CPUs installed, all
DIMMs installed, all HDDs installed, the host NICs (integrated and
embedded), the video card installed, and the SD card if installed.
The Firmware Inventory section displays the firmware version for the
firmware components and includes the BIOS, Lifecycle Controller version
(USC), and iDRAC firmware.
Each field can only display up to 48 characters. If it is greater than 48, the
string is truncated.
For more information, see the iDRAC6 Online Help.
To ensure that the Systems Inventory feature is working, do the following:
1
System must be configured to collect system inventory. To do this, use the
iDRAC Option ROM utility during system startup (Ctrl-E). In the
System
Services
menu, enable the Collect System Inventory on Restart (CSIOR)
option.
2 After enabling CSIOR, the host system reboots and starts, in the output
screen, towards the end of the BIOS startup, the message “Collecting
System Inventory” is displayed after several minutes.