Users Guide

192 Viewing the Configuration and Health of the Managed Server
Power Monitoring
The Power Monitoring screen enables you to view the following monitoring
and power statistics information:
• Power Monitoring — Displays the amount of power being used (one
minute average power value measured in AC watts) by the server as
reported by the System Board Current Monitor.
• Amperage — Displays the current consumption (AC in Amperes) in the
active Power Supply unit.
• Power Tracking Statistics — Displays information about the amount of
power used by the system since the reading was last reset.
• Peak Statistics — Displays information about the peak amount of power
used by the system since the reading was last reset.
• Power Consumption — Displays the average, minimum, and maximum
power consumption, and the maximum and minimum power times in the
system for the last minute, hour, day, and week.
• Show Graph — Displays a graphical representation of power consumption
for 1 Hour, 24 Hours, 3 Days, and 1 Week.
NOTE: Power and Amperage are measured in AC.
CPU
The CPU screen reports the health of each CPU on the managed server. This
health status is a roll-up of a number of individual thermal, power, and
functional tests.
POST
The Post Code screen displays the last system post code (in hexadecimal)
prior to booting the operating system of the managed server.