Users Guide

Configuring iDRAC6 for Single Sign-On and Smart Card Login 183
display. For US Central Standard Time (CST), this is –6. Use the
following RACADM timezone offset command to synchronize iDRAC6
time (through Remote or Telnet/SSH RACADM):
racadm config -g
cfgRacTuning –o cfgRacTuneTimeZoneOffset <offset
value in minutes>.
For example, if the system time is GMT -6
(US CST) and time is 2PM, set iDRAC6 time to GMT time of 18:00
which would require you to enter
" 360 " in the above command for the
offset. You can also use
cfgRacTuneDaylightoffset to allow for
daylight savings variation. This saves you from having to change the time
on those two occasions every year when the daylight savings adjustments
are made, or just allow for it in the above offset using
" 300 " in the
preceding example.