Users Guide

176 Configuring iDRAC6 for Single Sign-On and Smart Card Login
7 To validate the SSL certificate of the Active Directory servers, select the
Enable Certificate Validation
check box under Certificate Settings .
If you do not want to validate the SSL certificate of your Active Directory
servers, take no action, and skip to step 9.
8 Under Upload Active Directory CA Certificate , enter the file path of the
certificate or browse to find the certificate file, and then click
Upload .
NOTE: You must enter the absolute file path, which includes the full path and
the complete file name and file extension.
The certificate information for the Active Directory CA certificate that you
uploaded is displayed in the
Current Active Directory CA Certificate
section.
9 Click Next .
The
Active Directory Configuration and Management Step 2 of 4 screen
is displayed.
10 Select the Enable Active Directory check box.
11 Select Enable Single Sign-on if you want to log into iDRAC6 directly after
logging into your workstation without entering your domain user
authentication credentials, such as user name and password.
To log into iDRAC6 using this feature, you should have already logged
into your system using a valid Active Directory user account. Also you
should have already configured the user account to log into iDRAC6 using
the Active Directory credentials. iDRAC6 uses the cached Active
Directory credentials to log you in.
To enable SSO using the CLI, run the RACADM command:
racadm -g cfgActiveDirectory -o cfgADSSOEnable 1
12
Add User Domain Name , and enter the IP address of the Domain
Controller Server Address. Select either the
Look Up Domain Controllers
with DNS
or Specify Domain Controller Addresses . Select Next . The
Active Directory Configuration and Management Step 3 of 4 screen is
displayed.
13 Select the Standard Schema or Extended Schema option and click Next .
If you have selected
Standard Schema, go to step 13. If you have selected
Extended Schema , go to step 14.