Users Guide

Using iDRAC6 Directory Service 157
21 Enter the Group Name . The group name identifies the role group in the
Active Directory associated with iDRAC6.
22 Enter the Group Domain . The Group Domain is the fully qualified root
domain name for the forest.
23 In the Role Group Privileges section, set the group privileges. See
Table 5-13 for information on role group privileges.
NOTE: If you modify any of the permissions, the existing role group privilege
(Administrator, Power User, or Guest User) will change to either the Custom
Group or the appropriate role group privilege based on the permissions you
modified.
24 Click OK to save the role group settings.
An alert dialog is displayed, indicating that your settings are changed.
Click
OK to return to the Step 4a of 4 Active Directory Configuration
and Management
screen.
25 To add an additional role group, repeat step 20 through step 24.
26 Click Finish , and the click Done .
The main
Active Directory Configuration and Management summary
screen is displayed. Test the Active Directory settings you just configured.
27 Scroll to the bottom of the screen and click Test Settings .
The
Test Active Directory Settings screen is displayed.
28 Enter your iDRAC6 user name and password, and then click Start Test .
The test results and the test log displays. For additional information,
see "Testing Your Configurations" on page 161.
NOTE: You must have a DNS server configured properly on iDRAC6 to support
Active Directory log in. Navigate to the Network screen (click System iDRAC
Settings, and then click the Network/Security Network tab) to configure DNS
server(s) manually or use DHCP to get DNS server(s).
You have completed the Active Directory configuration with Standard Schema.