Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 115
Look Up Domain
Controllers with DNS
Select the Look Up Domain Controllers with DNS option
to obtain the Active Directory domain controllers from a
DNS lookup. When this option is selected, Domain
Controller Server Addresses 1-3 are ignored. Select User
Domain from Login to perform the DNS lookup with the
domain name of the login user. Otherwise, select Specify a
Domain and enter the domain name to use on the DNS
lookup. iDRAC6 attempts to connect to each of the
addresses (first 4 addresses returned by the DNS look up)
one by one until it makes a successful connection.
If Extended Schema is selected, the domain controllers are
where iDRAC6 device object and the Association objects
are located. If Standard Schema is selected, the domain
controllers are where the user accounts and the role groups
are located.
Specify Domain
Controller Addresses
Select the Specify Domain Controller Addresses option to
allow iDRAC6 to use the Active Directory Domain
Controller server addresses that are specified. When this
option is selected, DNS lookup is not performed. Specify
the IP address or the Fully Qualified Domain Name
(FQDN) of the domain controllers. When the Specify
Domain Controller Addresses option is selected, at least
one of the three addresses is required to be configured.
iDRAC6 attempts to connect to each of the configured
addresses one by one until it makes a successful connection.
If Standard Schema is selected, these are the addresses of
the domain controllers where the user accounts and the role
groups are located. If Extended Schema is selected, these
are the addresses of the domain controllers where iDRAC6
device object and the Association objects are located.
Step 3 of 4 Active Directory Configuration and Management
Table 5-19. Active Directory Configuration Settings
(continued)
Setting Description