Users Guide

Configuring iDRAC6 Enterprise 61
Using iDRAC6 Web Interface to Enable Discovery
and Monitoring
IPMI Discovery can also be enabled through the remote Web interface:
1
Open a supported Web browser window.
2 Log in to iDRAC6 Web interface using a login and password with
Administrator rights.
3 In the system tree, select System  iDRAC Settings  Network/Security
tab.
The
Network screen is displayed.
4 In the IPMI Settings section, ensure the Enable IPMI Over LAN check
box is selected (checked).
5 From the Channel Privilege Level Limit drop-down menu, select
Administrator .
6 Enter your site's RMCP+ Encryption Key , if used.
7 Click Apply if you made any changes on this screen.
8 In the system tree, select System  Alert Management tab  Platform
Events
.
The
Platform Events screen is displayed, displaying a list of events for
which you can configure iDRAC6 to generate alerts.
9 Enable alerts for one or more events by selecting the check box in the
Generate Alert column.
10 Click Apply if you made any changes on this screen.
11 Click Trap Settings . The Trap Settings screen is displayed.
12 In the IPv4 Destination List section, in the first available Destination IP
Address
field, select the Enabled check box, and then enter the IP address
of your Management Station.
13 Repeat step 12 for the IPv6 Destination List section.
14 Click Apply . You can click Send to send a test trap alert.
15 Click Email Alert Settings . The Email Alert Settings screen is displayed.