Users Guide

38 Configuring iDRAC6 Enterprise
For RACADM commands, see cfgRacTuning in the RACADM Command
Line Reference Guide for iDRAC and CMC available at
support.dell.com/manuals.
Configure iDRAC6 Services
Enable or disable iDRAC6 network services — such as Telnet, SSH, and the
Web server interface — and reconfigure ports and other service parameters.
• iDRAC6 Web interface — See "Configuring iDRAC6 Services" on
page 120
• RACADM — See "Configuring iDRAC6 Telnet and SSH Services Using
Local RACADM" on page 294
Configure Secure Sockets Layer (SSL)
Configure SSL for iDRAC6 Web server.
• iDRAC6 Web interface — See "Secure Sockets Layer (SSL)" on page 107
• RACADM — See cfgRacSecurity, sslcsrgen, sslcertupload,
sslcertdownload, and sslcertview in the
RACADM Command Line
Reference Guide for iDRAC and CMC available on the Dell Support
website at support.dell.com/manuals
.
Configure Virtual Media
Configure the virtual media feature so that you can install the operating
system on the Dell PowerEdge server. Virtual media allows the managed
server to access media devices on the management station or ISO CD/DVD
images on a network share as if they were devices on the managed server.
• iDRAC6 Web interface — See "Configuring and Using Virtual Media" on
page 261
• iDRAC6 Configuration Utility — See "Virtual Media Configuration" on
page 353
Configure a vFlash Media Card
Install and configure a vFlash Media card for use with iDRAC6.
• iDRAC6 Web interface and Using RACADM — See "Configuring the
vFlash SD Card and Managing vFlash Partitions" on page 239