Users Guide

36 Configuring iDRAC6 Enterprise
• Chassis LCD Panel — See the Dell Chassis Management Controller
Firmware User Guide.
• iDRAC6 Configuration Utility — See "Using iDRAC6 Configuration
Utility" on page 347.
• CMC Web interface — See "Configuring Network Settings Using CMC
Web Interface" on page 39.
• Remote and local RACADM — See
cfgLanNetworking in the RACADM
Command Line Reference Guide for iDRAC and CMC available on
support.dell.com/manuals
.
Configure iDRAC6 Users
Set up the local iDRAC6 users and permissions. iDRAC6 holds a table of
sixteen local users in firmware. You can set usernames, passwords, and roles
for these users.
• iDRAC6 Configuration Utility (configures administrative user only) —
See "LAN User Configuration" on page 355.
• iDRAC6 Web interface — See "Adding and Configuring iDRAC6 Users"
on page 99.
• Remote and local RACADM — See "Adding an iDRAC6 User" on
page 281.
NOTE: When using iDRAC6 in an Active Directory / generic LDAP Directory Service
environment, ensure that your user names conform to the Active Directory / generic
LDAP Directory Service naming convention in force.
Configure Directory Services
In addition to the local iDRAC6 users, you can use Microsoft Active Directory
or generic LDAP Directory Service to authenticate iDRAC6 user logins.
For more information, see "Using iDRAC6 Directory Service" on page 127.