Users Guide

242 Configuring the vFlash SD Card and Managing vFlash Partitions
4 Click Apply to enable or disable vFlash partition management on the card.
If any vFlash partition is attached, you cannot disable vFlash and an error
message is displayed.
NOTE: If vFlash is disabled, you can only view the SD card properties and will not
be able to perform other vFlash operations such as create partition (empty and
using an image file), manage partitions, format partitions, and download contents of
a partition.
5 Click Initialize . All existing partitions are removed and the card is reset. A
confirmation message is displayed.
6 Click OK . After the initialize operation is complete, a success message is
displayed.
NOTE: Initialize is available only if you select the vFlash Enable option.
If any vFlash partition is attached, the initialize operation fails and an error
message is displayed.
Available Space Displays the unused space on the SD card in MB. This space is
available to create more partitions on the vFlash SD card.
If the inserted SD card is uninitialized, then the available space
displays that the card is uninitialized.
Write Protected Displays whether the card is write-protected or not.
Health Displays the overall health of the SD card. This can be:
•OK
• Warning
•Critical
If it is warning, re-initialize the card.
If it is critical, reinstall and reinitialize the card.
vFlash Enable Select the checkbox to perform vFlash partition management on
the card. Clear the checkbox to disable vFlash partition
management.
Table 11-1. SD Card Properties
(continued)
Attribute Description