Release Notes

Resolution
For the operating system to auto-detect the Virtual Media drive, the iDRAC6 Virtual Media device can be reattached:
1.
Go to "System" > "Virtual Console/Media" >"Configuration".
2.
Set the "Attach Virtual Media" option to "Detach" and click "Apply".
3.
Set the "Attach Virtual Media" option to "Attach" and click "Apply".
Issue 12
Description
The "racresetcfg" command in RACADM restores all properties to their default values except "cfgDNSRacName" in the
"cfgLanNetworking" group.
Issue 13
Description
When using a configuration file with RACADM to configure iDRAC6, changing objects that affect the network connection
stops the rest of the configuration file from taking effect.
Issue 14
Description
To execute iDRAC DUPs in XenServer(TM) 5.6, you must install the procmail package. You can install the procmail RPM in
CentOS 5.4 i386, which can be downloaded from any public site that hosts CentOS packages. However, it is recommended
not to install *any* RPMs manually on XenServer, instead it is recommended that you download and install the OpenManage
Supplemental Pack from support.dell.com. It contains the procmail package and is the supported method for installing third
party packages and applications in XenServer.
Issue 15
Description
Using the iDRAC web console to shutdown the XenServer operating system by selecting "Graceful Shutdown" does not shut
down the server.
Resolution
As best practice, it is recommended that you use the shutdown menu option in the XenServer console or in the XenCenter
management GUI.
Issue 16
Description
TFTP firmware update from local RACADM does not work after a racresetcfg or if IPv6 addresses are used. Use the firmware
RACADM for TFTP firmware update.