Release Notes

Issue 34
Description
When remote management is enabled, the iDRAC WWN/MAC page may not immediately show the remotely enabled MACs
and instead may show "N/A" under the remotely assigned column. This may happen the first time the user navigates to the
WWN/MAC page. If this happens, navigate to a different page in the GUI and then return to the WWN/MAC page to see the
remotely assigned MACs. Ensure the host system has booted before navigating to the WWN/MAC page when remote
management is enabled.
Issue 35
Description
The supported legal values for the RACADM cfgRacTuneConRedirPort object are 1025 - 65535. The RACADM Command Line
Reference Guide for iDRAC6 1.7, iDRAC6 3.2, and CMC 3.2 includes port 1024 for this object but this is not supported in the
3.21 release.
Issue 36
Description
The RACADM Command Line Reference Guide for iDRAC6 1.7, iDRAC6 3.2, and CMC 3.2 defines the "--more" subcommand
for the
gettracelog command. For the 3.21 release "-m" should be used as "--more" is not supported.
Issue 37
Description
The RACADM Command Line Reference Guide for iDRAC6 1.7, iDRAC6 3.2, and CMC 3.2 defines the legal values for the
cfgRacTuneIpBlkFailWindow object as 10 - 655356 on iDRAC6. The correct range of legal values is 10 - 65535.
Issue 38
Description
The RACADM Command Line Reference Guide for iDRAC6 1.7, iDRAC6 3.2, and CMC 3.2 has four properties defined for the
cfgServerPower group:
• cfgServerPowerLastDayMinTime
• cfgServerPowerLastDayMaxTime
• cfgServerPowerLastWeekMinTime
• cfgServerPowerLastWeekMaxTime