Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 91
Prefix Length Configures the prefix length of the IPv6 address. It can be a
value between 1 and 128 inclusive. To change this setting,
you must first disable Autoconfiguration Enable by deselecting
the associated check box.
Gateway Configures the static IPv6 gateway for iDRAC6 NIC. To change
this setting, you must first disable Autoconfiguration Enable by
deselecting the associated check box.
Use DHCPv6 to
obtain DNS Server
addresses
Enable DHCP to obtain IPv6 DNS server addresses by selecting
the Use DHCPv6 to obtain DNS Server addresses check box.
When not using DHCP to obtain the DNS server addresses,
provide the IP addresses in the Preferred DNS Server and
Alternate DNS Server fields. The default value is Unchecked.
NOTE: When the Use DHCPv6 to obtain DNS Server addresses
check box is selected, IP addresses cannot be entered into the
Preferred DNS Server and Alternate DNS Server fields.
Preferred DNS
Server
Configures the static IPv6 address for the preferred DNS server.
To change this setting, deselect Use DHCPv6 to obtain DNS
Server Addresses.
Alternate DNS
Server
Configures the static IPv6 address for the alternate DNS server.
To change this setting, deselect Use DHCPv6 to obtain DNS
Server Addresses.
Table 5-3. IPMI Settings
Setting Description
Enable IPMI
Over LAN
When selected, indicates that the IPMI LAN channel is enabled.
The default is Unchecked.
Channel
Privilege Level
Limit
Configures the maximum privilege level for the user that can be
accepted on the LAN channel. Select one of the following options:
Administrator, Operator, or User. The default is Administrator.
Encryption Key Configures the encryption key. The encryption key must consist of
an even number of hexadecimal characters with a maximum of 40
characters with no spaces. The default IPMI encryption key is all
zeros.
Table 5-2. Network Settings
(continued)
Setting Description