Users Guide

Configuring the Management Station 69
• Check for signatures on downloaded programs: checked
• Use SSL 2.0: unchecked
• Use SSL 3.0: checked
• Use TLS 1.0: checked
• Warn about invalid site certificates: checked
• Warn if changing between secure and not secure mode: checked
• Warn if forms submittal is being redirected: checked
NOTE: If you choose to alter any of the above settings, It is recommended
that you learn and understand the consequences of doing so. For example, if
you choose to block pop-ups, portions of iDRAC6 Web interface will not
function properly.
9 Click Apply , then OK .
10 Click the Connections tab.
11 Under Local Area Network (LAN) settings , click LAN Settings .
12 If the Use a proxy server box is selected, select the Bypass proxy server for
local addresses
box.
13 Click OK twice.
14 Close and restart your browser to make sure all changes take effect.
Adding iDRAC6 to the List of Trusted Domains
When you access iDRAC6 Web interface through the Web browser, you may
be prompted to add iDRAC6 IP address to the list of trusted domains if the
IP address is missing from the list. When completed, click Refresh or
relaunch the Web browser to establish a connection to iDRAC6 Web
interface.
On some operating systems, Internet Explorer (IE) 8 may not prompt you to
add iDRAC6 IP address to the list of trusted domains if the IP address is
missing from the list.
NOTE: When connecting to the iDRAC Web interface with a certificate the browser
does not trust, the browser's certificate error warning may display a second time
after you acknowledge the first warning. This is the expected behavior to ensure
security.