Users Guide

46 Configuring iDRAC6 Enterprise
racadm config –g cfgRemoteHosts –o
cfgRhostsSyslogServer3 <servername3>; default is
blank
racadm config –g cfgRemoteHosts –o
cfgRhostsSyslogPort <portnumber>; default is 514
First Boot Device
This feature allows you to select the first boot device for your system and
enable boot once. The system boots from the selected device on the next and
subsequent reboots and remains as the first boot device in the BIOS boot
order, until it is changed again either from the iDRAC6 GUI or from the
BIOS Boot sequence. If Boot Once is enabled, the system boots from the
selected device only once. Subsequently, the system boots according to the
BIOS Boot sequence.
To select the first boot device through the remote Web interface:
1
Open a supported Web browser window.
2 Log in to iDRAC6 Web interface.
3 In the system tree, select System  Setup tab  First Boot Device . The
First Boot Device screen is displayed.
Table 2-3 lists the First Boot Device settings.
Table 2-3. First Boot Device
Attribute Description
First Boot Device Select the first boot device from the drop-down list. The system
will boot from the selected device on next and subsequent
reboots.
Boot Once Selected = Enabled; Deselected = Disabled. Check this option
to boot from the selected device on the next boot. Thereafter,
the system will boot from the first boot device in the BIOS boot
order.