Users Guide

Configuring the vFlash SD Card and Managing vFlash Partitions 253
Before attaching or detaching a partition, ensure the following:
•The card is enabled.
• An initialize operation is not already being performed on the card.
To attach or detach partitions:
1
On the iDRAC6 Web interface, select System  vFlash tab  Manage
subtab. The Manage Partitions page is displayed.
2 In the Attached column, select the checkbox for the partition(s) that you
want to attach or clear the checkbox for the partition(s) that you want to
detach.
NOTE: The detached partitions are not displayed in the boot sequence.
3 Click Apply . The partitions are attached or detached based on the
selections.
Operating System Behavior for Attached Paritions
When partitions are attached and the host operating system is Windows, the
drive letters that is assigned to the attached partitions are controlled by the
operating system.
If a partition is read-only, it will be read-only as seen in the host operating
system.
If the host operating system does not support the file system of an attached
partition, you cannot read or modify the contents of the partition from the
host operating system. For example, partition type EXT2 cannot be read from
Windows operating system.
When you change the label name of an attached partition from the host
operating system, it does not impact the label name stored by iDRAC for that
partition.