Users Guide

Viewing the Configuration and Health of the Managed Server 191
The firmware time stamp always matches the time stamp iDRAC last had
prior to the firmware update, which can be BIOS time if the system had been
booted or rebooted prior to the firmware update or the CMC time.
CMC
CMC screen displays the health status, firmware revision, and IP addresses of
the Chassis Management Controller. You can also launch CMC Web
interface by clicking the Launch the CMC Web Interface button. See the
Chassis Management Controller Firmware User Guide for more information.
NOTE: Launching CMC Web GUI from iDRAC6 directs your search with the same IP
address format. For example, if you open iDRAC6 Web GUI with an IPv6 address
format, CMC Web page will also open with a valid IPv6 address.
Batteries
The Batteries screen displays the status of the system board coin-cell battery
that maintains the Real-Time Clock (RTC) and CMOS configuration data
storage of the managed system.
Temperatures
The Temperatures screen displays the status and readings of the on–board
ambient temperature probe. Minimum and maximum temperature
thresholds for warning and failure states are shown, along with the current
health status of the probe.
NOTE: Depending on the model of your server, temperature thresholds for warning
and failure states and/or the health status of the probe may not be displayed.
Voltages
The Voltage Probes screen displays the status and reading of the Voltage
probes, providing such information as the status of the on-board voltage rail
and CPU core sensors.