Users Guide

188 Viewing the Configuration and Health of the Managed Server
• Extended CPLD Version — Displays the extended board CPLD version.
• Firmware Updated — Displays the date and time of the last successful
iDRAC6 firmware update.
• MAC Address — Displays the MAC address associated with the LOM
(LAN on Motherboard) Network Interface Controller of iDRAC6.
IPv4 Settings
• Enabled — Displays whether IPv4 protocol support is enabled or disabled
NOTE: The IPv4 protocol option is enabled by default.
• DHCP Enabled — Enabled if iDRAC6 is set to fetch its IP address and
associated info from a DHCP server.
• IP Address — Displays the IP address associated with iDRAC6 (not the
managed server.)
• Subnet Mask — Displays the TCP/IP Subnet Mask configured for
iDRAC6.
• Gateway — Displays the IP address of the network gateway configured for
iDRAC6.
• Use DHCP to obtain DNS server addresses — Displays whether DHCP is
used to obtain DNS Server Addresses.
• Preferred DNS Server — Displays the currently active primary DNS server.
• Alternate DNS Server — Displays the alternate DNS server address.
IPv6 Settings
• Enabled — Displays whether IPv6 protocol support is enabled or disabled.
• Autoconfiguration Enabled — Displays whether Autoconfiguration is
enabled or disabled.
• Link Local Address — Displays the link local IPv6 address for iDRAC6
NIC.
• IPv6 Address 1-16 — Displays up to 16 IPv6 addresses (IPv6 Address 1 to
IPv6 Address 16) for iDRAC6 NIC.
• Gateway — Displays the IP address of the network gateway configured for
iDRAC6.