Users Guide

146 Using iDRAC6 Directory Service
Adding Users or User Groups
1 Right-click the Association Object and select Properties .
2 Select the Users tab and click Add .
3 Enter the user or User Group name and click OK .
Adding Privileges
1 Select the Privileges Object tab and click Add .
2 Enter the Privilege Object name and click OK .
Click the Privilege Object tab to add the privilege object to the association that
defines the user’s or user group’s privileges when authenticating to an iDRAC6
device. Only one privilege object can be added to an Association Object.
Adding iDRAC6 Devices or iDRAC6 Device Groups
To add iDRAC6 devices or iDRAC6 device groups:
1
Select the Products tab and click Add .
2 Enter iDRAC6 devices or iDRAC6 device group name and click OK .
3 In the Properties window, click Apply and click OK .
Click the Products tab to add one iDRAC6 device connected to the network
that is available for the defined users or user groups. You can add multiple
iDRAC6 devices to an Association Object.
Configuring Microsoft Active Directory With Extended Schema Using
iDRAC6 Web Interface
1 Open a supported Web browser window.
2 Log in to iDRAC6 Web interface.
3 In the system tree, select System  iDRAC Settings  Network/Security
tab  Directory Service  Microsoft Active Directory .
The
Active Directory summary screen is displayed.
4 Scroll to the bottom of the screen and click Configure Active Directory .
The
Step 1 of 4 Active Directory screen is displayed.
5 To validate the SSL certificate of your Active Directory servers, select the
Certificate Validation Enabled
check box under Certificate Settings .