Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 97
5 Configure your e-mail alert destination.
a Select the Enabled check box for the first undefined e - mail alert.
b Enter a valid e - mail address in the Destination Email Address field.
c Click Apply .
NOTE: To successfully send a test e-mail, the SMTP (Email) Server must be
configured in the SMTP (Email) Server Address Settings section of the Email
Alert Settings screen. Specify an SMTP server in the field provided using
either the dot separated format (for example, 192.168.1.1) or the DNS name.
The IP address of the SMTP Server sends sends e-mail alerts to iDRAC when
a platform event occurs.
d
In the Modify Source Email Name field, enter the originator e - mail
for the alert, or leave it blank to use the default e
- mail originator. The
default is blade_slot@iDRAC6 IP Address.
•If the
Modify Source Email Name field is blank, iDRAC6 host
name is configured, and DNS Domain Name is active, then the
source e
- mail address is:<iDRAC6 host name>@<DNS Domain
name>.
• If the field is blank, iDRAC6 host name is blank, and the DNS
Domain Name is active, then the source e
- mail address is:
<iDRAC6 Slot
x >@<DNS Domain name>.
• If the field is blank, iDRAC6 host name is blank, and the DNS
Domain Name is blank, then the source e
- mail address is:
<iDRAC6 Slot
x >@<iDRAC6 IP Address>.
• If the field is "a string without @", and DNS Domain Name is
active, then the source e
- mail address is: <a string without
@>@<DNS Domain name>.
• If the field is "a string without @", and DNS Domain Name is
blank, then the source e
- mail address is :<a string without
@>@<iDRAC6 IP Address>.
• If the field is "a string with @", and DNS Domain Name is active,
then the source e
- mail address is:<a string with @>@<DNS
Domain name>.
• If the field is "a string with @", and the DNS Domain Name is
blank, then the source e
- mail address is:<a string with
@>@<iDRAC6 IP Address>.