Users Guide

Configuring iDRAC6 Enterprise 39
Install the Managed Server Software
Install the operating system on the Dell PowerEdge server using virtual media
and then install the Dell OpenManage software on the managed Dell
PowerEdge server and set up the last crash screen feature.
• Virtual Console — See "Installing the Software on the Managed Server" on
page 81
• iVMCLI — See "Using the Virtual Media Command Line Interface Utility"
on page 339
Configure the Managed Server for the Last Crash Screen Feature
Set up the managed server so that iDRAC6 can capture the screen image after
an operating system crash or freeze.
• Managed server — See "Configuring the Managed Server to Capture the
Last Crash Screen" on page 82 and "Disabling the Windows Automatic
Reboot Option" on page 83
Configuring Network Settings Using CMC Web
Interface
NOTE: You must have Chassis Configuration Administrator privilege to set up
iDRAC6 network settings from CMC.
NOTE: The default CMC username is root and the default password is calvin.
Launching iDRAC6 Web Interface From CMC
CMC provides limited management of individual chassis components, such as
servers. For complete management of these individual components, CMC
provides a launch point for the server’s iDRAC6 Web interface.
To launch iDRAC6 from CMC:
1
Log in to CMC Web interface.
2 In the system tree, select Server Overview . The Servers Status screen
displays the list of available servers.
3 Click iDRAC for the server you want to manage. The iDRAC GUI is
launched in a new browser window.