Users Guide

28 iDRAC6 Enterprise Overview
•The iDRAC6 CIM Element Mapping and iDRAC6 SM-CLP Property
Database
documents available on the Dell Enterprise Technology Center
at
delltechcenter.com provide information on iDRAC6 SM–CLP Property
Database, mappings between WS–MAN classes and SM–CLP targets and
Dell implementation details.
•The
Dell RACADM Command Line Reference Guide for iDRAC6 and
CMC
provides information about the RACADM subcommands,
supported RACADM interfaces, and property database groups and object
definitions for iDRAC6 Enterprise on Blade Servers, iDRAC6 Enterprise or
Express on Rack and Tower Servers, and CMC.
•The
Glossary provides information about the terms used in this
document.
The following system documents are also available to provide more
information about the system in which iDRAC6 is installed:
• The safety instructions that came with your system provide important
safety and regulatory information. For additional regulatory information,
see the Regulatory Compliance home page at
dell.com/regulatory_compliance . Warranty information may be included
within this document or as a separate document.
•The
Getting Started Guide provides an overview of system features,
setting up your system, and technical specifications.
•The
Hardware Owner’s Manual provides information about system
features and describes how to troubleshoot the system and install or
replace system components.
• Systems management software documentation describes the features,
requirements, installation, and basic operation of the software.
• Operating system documentation describes how to install (if necessary),
configure, and use the operating system software.
• Documentation for any components you purchased separately provides
information to configure and install these options.