Users Guide

256 Configuring the vFlash SD Card and Managing vFlash Partitions
Managing vFlash Partitions Using RACADM
You can use the vFlashPartition subcommand to create, delete, list, or
view the status of partitions on an already initialized vFlash or standard SD
card. The format is:
racadm vflashpartition <create | delete | status |
list> <options>
NOTE: You must have Access Virtual Media privileges to perform vFlash partition
management.
Valid O pti ons:
Options only valid for the create action:
-i <index> Index of the partition for which this command applies.
<index> must be an integer from 1 to 16.
NOTE: For the standard SD card, index value is limited to 1
because only one partition of size 256 MB is supported.
-o <label> Label that is shown when the partition is mounted on the
operating system.
<label> must be a string up to six alphanumeric characters
and must not contain spaces.
-e <type> Emulation type for the partition. <type> must be floppy,
cdrom, or HDD.