Users Guide

250 Configuring the vFlash SD Card and Managing vFlash Partitions
3 Click Apply . A warning message indicating that all the data on the
partition will be erased is displayed. Click
OK . The selected partition is
formated with the specified file system type.
An error message is displayed if:
• The card is write-protected.
• An initialize operation is already being performed on the card.
Table 11-4. Format Partition Page Options
Field Description
Label Select the partition label that you want to format. The first
available partition is selected by default.
All existing partitions of type Floppy or Hard Disk are
available in the drop-down list. Partitions that are attached
or that are read-only are not available in the drop-down list.
Type to Format to Select the file system type you want to format the partition
to. The available options are EXT2, EXT3, FAT16, and
FAT32. For the standard SD card, only FAT32 is available.