Users Guide

240 Configuring the vFlash SD Card and Managing vFlash Partitions

NOTE: You can only perform a single vFlash operation at a time. The first operation

must be completed before you perform another vflash operation. For example, if you

start a create from image operation using RACADM, you cannot perform a create,

download, or format operation using RACADM or GUI. You must wait until the

operation is complete before performing the next vFlash operation.

Installing a vFlash or Standard SD Card

Remove the blade from the chassis.

Locate the vFlash media slot at the back corner of the system.

NOTE: You do not need to remove the blade cover to install or remove

the card.

With the label side facing up, insert the contact-pin end of the SD card

into the card slot on the module.

NOTE: The slot is keyed to ensure correct insertion of the card.

Press inward on the card to lock it into the slot.

Re-install the blade in the chassis.