Users Guide

Using iDRAC6 Directory Service 145
5 Click OK .
6 Right-click the privilege object that you created, and select Properties .
7 Click the Remote Management Privileges tab and select the privileges
that you want the user or group to have (see Table 5-13).
Creating an Association Object
NOTE: iDRAC6 Association Object is derived from Group and its scope is set to
Domain Local.
1 In the Console Root (MMC) window, right-click a container.
2 Select New  Dell Remote Management Object Advanced .
This opens the
New Object window.
3 Enter a name for the new object.
4 Select Association Object .
5 Select the scope for the Association Object .
6 Click OK .
7 Provide access privileges to the authenticated users for accessing the
created association objects. To do this:
a Go to Administrative Tools  ADSI Edit . The ADSI Edit window is
displayed.
b In the right-pane, navigate to the created association object, right-
click and select
Properties .
c In the Security tab, click Add .
d Ty p e Authenticated Users , click Check Names , and click OK .
The
Authenticated Users is added to the list of Groups and user
names
.
e Click OK .
Adding Objects to an Association Object
Using the Association Object Properties window, you can associate users or
user groups, privilege objects, and iDRAC6 devices or iDRAC6 device groups.
You can add groups of Users and iDRAC6 devices. The procedure for creating
Dell-related groups and non-Dell-related groups is identical.