Users Guide

120 Configuring iDRAC6 Enterprise Using the Web Interface
Disabling Local Configuration Access
1 Click System  iDRAC Settings  Network/Security  Services .
2 Under Local Configuration , click to select Disable iDRAC6 local USER
Configuration Updates
to disable access.
3 Click Apply .
Configuring iDRAC6 Services
NOTE: To modify these settings, you must have Configure iDRAC6 permission.
NOTE: When you apply changes to services, the changes take effect immediately.
Existing connections may be terminated without warning.
NOTE: There is a known issue with the Telnet client supplied with Microsoft
Windows. Use another Telnet client such as HyperTerminal or PuTTY.
1 Click System  iDRAC Settings  Network/Security tab.
2 Click Services to open the Services configuration screen.
3 Configure the following services, as required:
• Web server — see Table 5-23 for Web server settings
• SSH — see Table 5-24 for SSH settings
• Telnet — see Table 5-25 for Telnet settings
• SNMP Agent — see Table 5-26 for SNMP agent settings
• Automated System Recovery Agent — see Table 5-27 for Automated
System Recovery Agent settings
4 Click Apply .