Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 117
Standard Schema
Selection
Select this option if you want to use Standard Schema with
Active Directory.
Click Next to display the Step 4a of 4 Active Directory
page.
Select the Look Up Global Catalog Servers with DNS
option and enter the Root Domain Name to use on a DNS
lookup to obtain the Active Directory Global Catalog
Servers. When this option is selected, Global Catalog
Server Addresses 1-3 are ignored. iDRAC6 attempts to
connect to each of the addresses (first 4 addresses returned
by the DNS lookup) one by one until it makes a successful
connection. A Global Catalog server is required only for
Standard Schema in the case that the user accounts and the
role groups are in different domains.
Select the Specify Global Catalog Server Addresses option
and enter the IP address or the FQDN of the Global Catalog
server(s). When this option is selected, DNS lookup is not
performed. At least one of the three addresses must be
configured. iDRAC6 attempts to connect to each of the
configured addresses one by one until it makes a successful
connection. Global Catalog server is required only for
Standard Schema in the case that the user accounts and the
role groups are in different domains.
Role Groups: Specifies the list of role groups associated with
iDRAC6.
Group Name: Specifies the name that identifies the role
group in the Active Directory associated with iDRAC6.
Group Domain: Specifies the group domain type where the
Role Group resides.
Role Group Privileges: Specifies the group privilege level.
(see Table 5-20)
These settings are displayed only if iDRAC6 has been
configured for use with a Standard Active Directory
Schema.
Table 5-19. Active Directory Configuration Settings
(continued)
Setting Description