Users Guide

58 Configuring iDRAC6 Enterprise
Using iDRAC6 Web Interface to Enable Discovery
and Monitoring
IPMI Discovery can also be enabled through the remote Web interface:
1
Open a supported Web browser window.
2 Log in to iDRAC6 Web interface using a login and password with
Administrator rights.
3 In the system tree, select System  Remote Access  iDRAC6 .
4 Click the Network/Security tab.
The
Network screen appears.
5 Click IPMI Settings .
6 Ensure the Enable IPMI Over LAN check box is selected (checked).
7 Select Administrator from the Channel Privilege Level Limit drop-down
menu.
8 Enter your site's RMCP+ Encryption Key , if used.
9 Click Apply if you made any changes on this screen.
10 In the system tree, select System .
11 Click the Alert Management tab, and then click Platform Events .
The
Platform Events screen appears, displaying a list of events for which
you can configure iDRAC6 to generate e
- mail alerts.
12 Enable e - mail alerts for one or more events by selecting the check box in
the
Generate Alert column.
13 Click Apply if you made any changes on this screen.
14 Click Trap Settings .
The
Trap Settings screen appears.
15 In the first available Destination IP Address field in the IPv4 Destination
List
section, select the Enabled check box, and then enter the IP address
of your Management Station.
16 Click Apply if you made any changes on this screen.
You can now send a test trap by clicking the Send link in the Test Trap column.