Users Guide

Recovering and Troubleshooting the Managed System 369
How can I find
the IP address of
iDRAC6?
From CMC Web interface:
1 Click Chassis  Servers , then click the Setup tab.
2 Click Deploy .
3 Read the IP address for your server from the table that is
displayed.
From the Virtual Console:
• Reboot the server and enter iDRAC6 Configuration Utility by
pressing <Ctrl><E>.
• Watch for the IP address which displays during BIOS POST.
• Select the "Dell CMC" console in the OSCAR to log in to CMC
through a local serial connection. CMC RACADM commands
can be issued from this connection. See the
Dell Chassis
Management Controller Administrator Reference Guide for a
complete list of CMC RACADM subcommands.
• Use the local RACADM
getsysinfo command to view iDRAC6 IP
address.
For example:
$ racadm getniccfg -m server-1
DHCP Enabled = 1
IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
From local RACADM:
Enter the following command at a command prompt:
racadm getsysinfo
From the LCD:
1 On the Main Menu, highlight Server and press the check button.
2 Select the server whose IP address you seek and press the
check button.
Table 19-13. Frequently Asked Questions/Troubleshooting (continued)
Question Answer