Users Guide

Recovering and Troubleshooting the Managed System 363
Viewing iDRAC6 Log
iDRAC6 Log is a persistent log maintained in iDRAC6 firmware. The log
contains a list of user actions (such as log in, log out, and security policy
changes) and alerts issued by iDRAC6. The log gets erased after iDRAC6
firmware update.
Where the System Event Log (SEL) contains records of events that occur in
the managed server, iDRAC6 Log contains records of events that occur in
iDRAC6.
To access iDRAC6 Log, perform the following steps:
•Click System  Remote Access  iDRAC6  Logs. The iDRAC6 Log .
screen is displayed. This screen provides the information listed in
Table 19-9.
Warning PCIE NonFatal Er: Non Fatal I/O
Group sensor, PCIe error
(<location>)
This event is generated in
association with a CPU IERR
Table 19-9. iDRAC6 Log Information
Field Description
Date/Time The date and time (for example, Dec 19 16:55:47).
iDRAC6 sets its clock from the managed server’s clock at iDRAC6
initialization. If the managed server is off when iDRAC6 is started,
then iDRAC6 sets its clock from the CMC in the chassis where the
blade resides.
NOTE: Since the time source for iDRAC6 is different depending on the
managed server’s power state (at the time of iDRAC6 initialization), the
managed server time should be set to match CMC time. If the system and
CMC times do not match, inconsistent times may be reported in iDRAC6
logs after iDRAC initialization events.
Source The interface that caused the event.
Description A brief description of the event and the user name that logged in to
iDRAC6.
Table 19-8. Server Status Screen
(continued)
Severity Message Cause