Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise for Blade Servers Version 3.0
- User Guide
- Contents
- iDRAC6 Enterprise Overview
- Configuring iDRAC6 Enterprise
- Before You Begin
- Interfaces for Configuring iDRAC6
- Configuration Tasks
- Configure the Management Station
- Configure iDRAC6 Networking
- Configure iDRAC6 Users
- Configure Directory Services
- Configure IP Filtering and IP Blocking
- Configure Platform Events
- Enabling or Disabling Local Configuration Access
- Configure iDRAC6 Services
- Configure Secure Sockets Layer (SSL)
- Configure Virtual Media
- Configure a vFlash Media Card
- Install the Managed Server Software
- Configure the Managed Server for the Last Crash Screen Feature
- Configuring Network Settings Using CMC Web Interface
- Viewing FlexAddress Mezzanine Card Fabric Connections
- Remote Syslog
- First Boot Device
- Remote File Share
- Internal Dual SD Module
- Updating iDRAC6 Firmware
- Updating the USC Repair Package
- Configuring iDRAC6 For Use With IT Assistant
- Using iDRAC6 Configuration Utility to Enable Discovery and Monitoring
- Using iDRAC6 Web Interface to Enable Discovery and Monitoring
- Using IT Assistant to View iDRAC6 Status and Events
- Configuring the Management Station
- Management Station Set Up Steps
- Management Station Network Requirements
- Configuring a Supported Web Browser
- Installing iDRAC6 Software on the Management Station
- Installing a Java Runtime Environment (JRE)
- Installing Telnet or SSH Clients
- Installing a TFTP Server
- Installing Dell OpenManage IT Assistant
- Installing Dell Management Console
- Configuring the Managed Server
- Configuring iDRAC6 Enterprise Using the Web Interface
- Accessing the Web Interface
- Configuring iDRAC6 NIC
- Configuring Platform Events
- Configuring IPMI Over LAN
- Adding and Configuring iDRAC6 Users
- Securing iDRAC6 Communications Using SSL and Digital Certificates
- Configuring and Managing Microsoft Active Directory Certificates
- Enabling or Disabling Local Configuration Access
- Configuring iDRAC6 Services
- Updating iDRAC6 Firmware
- Using iDRAC6 Directory Service
- Using iDRAC6 With Microsoft Active Directory
- Prerequisites for Enabling Active Directory Authentication for iDRAC6
- Supported Active Directory Authentication Mechanisms
- Extended Schema Active Directory Overview
- Configuring Extended Schema Active Directory to Access iDRAC6
- Extending the Active Directory Schema
- Installing the Dell Extension to the Active Directory Users and Computers Snap-In
- Adding iDRAC6 Users and Privileges to Active Directory
- Configuring Microsoft Active Directory With Extended Schema Using iDRAC6 Web Interface
- Configuring Active Directory With Extended Schema Using RACADM
- Standard Schema Active Directory Overview
- Configuring Standard Schema Active Directory to Access iDRAC6
- Testing Your Configurations
- Using iDRAC6 with LDAP Directory Service
- Frequently Asked Questions
- Configuring iDRAC6 for Single Sign- On and Smart Card Login
- About Kerberos Authentication
- Prerequisites for Active Directory SSO and Smart Card Authentication
- Using Active Directory SSO
- Configuring Smart Card Authentication
- Configuring Smart Card Login in iDRAC6
- Logging Into iDRAC6 Using Active Directory Smart Card Authentication
- Frequently Asked Questions About SSO
- Troubleshooting the Smart Card Logon in iDRAC6
- Viewing the Configuration and Health of the Managed Server
- Configuring and Using Serial Over LAN
- Using GUI Virtual Console
- Configuring the vFlash SD Card and Managing vFlash Partitions
- Configuring and Using Virtual Media
- Using the RACADM Command Line Interface
- RACADM Subcommands
- Using local RACADM Commands
- Using the RACADM Utility to Configure iDRAC6
- Displaying Current iDRAC6 Settings
- Managing iDRAC6 Users with RACADM
- Adding an iDRAC6 User
- Enabling an iDRAC6 User With Permissions
- Uploading, Viewing, and Deleting SSH Keys Using RACADM
- Removing an iDRAC6 User
- Testing E-mail Alerting
- Testing iDRAC6 SNMP Trap Alert Feature
- Configuring iDRAC6 Network Properties
- Configuring IPMI Over LAN
- Configuring PEF
- Configuring PET
- Configuring IP Filtering (IP Range)
- Configuring IP Blocking
- Configuring iDRAC6 Telnet and SSH Services Using Local RACADM
- Remote and SSH/Telnet RACADM
- Using an iDRAC6 Configuration File
- Configuring Multiple iDRAC6s
- Power Monitoring and Power Management
- Using iDRAC6 Enterprise SM-CLP Command Line Interface
- Using the WS-MAN Interface
- Deploying Your Operating System Using iVMCLI
- Using iDRAC6 Configuration Utility
- Recovering and Troubleshooting the Managed System
- Safety First - For You and Your System
- Trouble Indicators
- Problem Solving Tools
- Checking the System Health
- Checking the System Event Log (SEL)
- Checking the Post Codes
- Viewing the Last System Crash Screen
- Viewing the Most Recent Boot Sequences
- Checking the Server Status Screen for Error Messages
- Viewing iDRAC6 Log
- Viewing System Information
- Identifying the Managed Server in the Chassis
- Using the Diagnostics Console
- Managing Power on a Remote System
- Troubleshooting and Frequently Asked Questions
- Index
240 Configuring the vFlash SD Card and Managing vFlash Partitions
An error message is displayed if:
• The card is write-protected.
• The label name matches the label of an existing partition.
• The size of the image file is greater than 4GB or exceeds the available
space on the card.
• The image file does not exist or the image file extension is neither
.img
nor
.iso
.
• An initialize operation is already being performed on the card.
Formatting a Partition
You can format an existing partition on the vFlash SD card based on the type
of file system. The supported file system types are EXT2, EXT3, FAT16, and
FAT32. The standard SD card with limited vFlash features supports only the
FAT32 format.
You can only format Hard Disk or Floppy partitions. Formatting CD
partitions is not supported. You cannot format read-only partitions.
Table 11-3. Create Partition from Image File Page Options
Field Description
Index Select a partition index. Only unused indices are displayed
in the drop-down list. The lowest available index is selected
by default. You can change it to any other index value from
the drop-down list.
NOTE: For the standard SD card, only index 1 is available.
Label Enter a unique label for the new partition. This can contain
up to six alphanumeric characters. Do not include spaces in
the label name. The characters are displayed in upper case.
NOTE: For the standard SD card, the label name must be
VFLASH. If not, an error message is displayed.
Emulation Ty p e Select the emulation type for the partition from the drop-
down list. The available options are Floppy, HDD, and
CDROM.
Image Location Click Browse and specify the image file location. Only .img
or .iso file types are supported.