Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 111
Specify Domain
Controller Addresses
Select the Specify Domain Controller Addresses option to
allow iDRAC6 to use the Active Directory Domain
Controller server addresses that are specified. When this
option is selected, DNS lookup is not performed. Specify
the IP address or the Fully Qualified Domain Name
(FQDN) of the domain controllers. When the Specify
Domain Controller Addresses option is selected, at least
one of the three addresses is required to be configured.
iDRAC6 attempts to connect to each of the configured
addresses one by one until it makes a successful connection.
If Standard Schema is selected, these are the addresses of
the domain controllers where the user accounts and the role
groups are located. If Extended Schema is selected, these
are the addresses of the domain controllers where iDRAC6
device object and the Association objects are located.
Step 3 of 4 Active Directory Configuration and Management
Extended Schema
Selection
Select this option if you want to use Extended Schema with
Active Directory.
Click Next to display the Step 4 of 4 Active Directory
Configuration and Management page.
iDRAC6 Name: Specifies the name that uniquely identifies
iDRAC6 in Active Directory. This value is NULL by default.
iDRAC6 Domain Name: The DNS name (string) of the
domain where the Active Directory iDRAC object resides.
This value is NULL by default.
These settings are displayed only if iDRAC6 has been
configured for use with an Extended Active Directory
Schema.
Table 5-26. Active Directory Configuration Settings
(continued)
Setting Description