Administrator Guide
Table Of Contents
- Integrated Dell Remote Access Controller 6 (iDRAC6)
- Administrator Reference Guide
- Contents
- Introduction
- RACADM Subcommand Details
- help
- arp
- clearasrscreen
- closessn
- clrraclog
- clrsel
- config
- coredump
- coredumpdelete
- fwupdate
- getconfig
- getniccfg
- getraclog
- getractime
- getsel
- getssninfo
- getsvctag
- getsysinfo
- gettracelog
- ifconfig
- krbkeytabupload
- localConRedirDisable
- netstat
- ping
- ping6
- racdump
- racreset
- racresetcfg
- remoteimage
- serveraction
- setniccfg
- sshpkauth
- sslcertdownload
- sslcertupload
- sslcertview
- sslcsrgen
- sslkeyupload
- testemail
- testtrap
- traceroute
- traceroute6
- usercertupload
- usercertview
- version
- vflashsd
- vflashpartition
- vmdisconnect
- vmkey
- iDRAC6 Property Database Group and Object Definitions
- Displayable Characters
- idRacInfo
- cfgLanNetworking
- cfgNicIPv4Enable (Read/Write)
- cfgNicSelection (Read/Write)
- cfgNicVLanEnable (Read/Write)
- cfgNicVLanId (Read/Write)
- cfgNicVLanPriority (Read/Write)
- cfgDNSDomainNameFromDHCP (Read/Write)
- cfgDNSDomainName (Read/Write)
- cfgDNSRacName (Read/Write)
- cfgDNSRegisterRac (Read/Write)
- cfgDNSServersFromDHCP (Read/Write)
- cfgDNSServer1 (Read/Write)
- cfgDNSServer2 (Read/Write)
- cfgNicEnable (Read/Write)
- cfgNicIpAddress (Read/Write)
- cfgNicNetmask (Read/Write)
- cfgNicGateway (Read/Write)
- cfgNicUseDhcp (Read/Write)
- cfgNicMacAddress (Read Only)
- cfgRemoteHosts
- cfgRhostsFwUpdateTftpEnable (Read/Write)
- cfgRhostsFwUpdateIpAddr (Read/Write)
- cfgRhostsFwUpdatePath (Read/Write)
- cfgRhostsSmtpServerIpAddr (Read/Write)
- cfgRhostsSyslogEnable (Read/Write)
- cfgRhostsSyslogPort (Read/Write)
- cfgRhostsSyslogServer1 (Read/Write)
- cfgRhostsSyslogServer2 (Read/Write)
- cfgRhostsSyslogServer3 (Read/Write)
- cfgUserAdmin
- cfgEmailAlert
- cfgSessionManagement
- cfgSerial
- cfgSerialBaudRate (Read/Write)
- cfgSerialConsoleEnable (Read/Write)
- cfgSerialConsoleQuitKey (Read/Write)
- cfgSerialConsoleIdleTimeout (Read/Write)
- cfgSerialConsoleNoAuth (Read/Write)
- cfgSerialConsoleCommand (Read/Write)
- cfgSerialHistorySize (Read/Write)
- cfgSerialCom2RedirEnable (Read/Write)
- cfgSerialSshEnable (Read/Write)
- cfgSerialTelnetEnable (Read/Write)
- cfgOobSnmp
- cfgRacTuning
- cfgRacTuneConRedirPort (Read/Write)
- cfgRacTuneRemoteRacadmEnable (Read/Write)
- cfgRacTuneCtrlEConfigDisable
- cfgRacTuneHttpPort (Read/Write)
- cfgRacTuneHttpsPort (Read/Write)
- cfgRacTuneIpRangeEnable (Read/Write)
- cfgRacTuneIpRangeAddr (Read/Write)
- cfgRacTuneIpRangeMask (Read/Write)
- cfgRacTuneIpBlkEnable (Read/Write)
- cfgRacTuneIpBlkFailCount (Read/Write)
- cfgRacTuneIpBlkFailWindow (Read/Write)
- cfgRacTuneIpBlkPenaltyTime (Read/Write)
- cfgRacTuneSshPort (Read/Write)
- cfgRacTuneTelnetPort (Read/Write)
- cfgRacTuneConRedirEnable (Read/Write)
- cfgRacTuneConRedirEncryptEnable (Read/Write)
- cfgRacTuneAsrEnable (Read/Write)
- cfgRacTuneDaylightOffset (Read/Write)
- cfgRacTuneTimezoneOffset (Read/Write)
- cfgRacTuneLocalServerVideo (Read/Write)
- cfgRacTuneLocalConfigDisable (Read/Write)
- cfgRacTuneWebserverEnable (Read/Write)
- cfgRacTuneVirtualConsoleAuthorizeMultipleSessions (Read/Write)
- ifcRacManagedNodeOs
- cfgRacSecurity
- cfgRacVirtual
- cfgServerInfo
- cfgActiveDirectory
- cfgADRacDomain (Read/Write)
- cfgADRacName (Read/Write)
- cfgADEnable (Read/Write)
- cfgADSSOEnable (Read/Write)
- cfgADDomainController1 (Read/Write)
- cfgADDomainController2 (Read/Write)
- cfgADDomainController3 (Read/Write)
- cfgADAuthTimeout (Read/Write)
- cfgADType (Read/Write)
- cfgADGlobalCatalog1 (Read/Write)
- cfgADGlobalCatalog2 (Read/Write)
- cfgADGlobalCatalog3 (Read/Write)
- cfgADCertValidationEnable (Read/Write)
- cfgADDcSRVLookupEnable (Read/Write)
- cfgADDcSRVLookupbyUserdomain (Read/Write)
- cfgADDcSRVLookupDomainName (Read/Write)
- cfgADGcSRVLookupEnable (Read/Write)
- cfgADGcRootDomain (Read/Write)
- cfgLDAP
- cfgLdapEnable (Read/Write)
- cfgLdapServer (Read/Write)
- cfgLdapPort (Read/Write)
- cfgLdapBasedn (Read/Write)
- cfgLdapUserAttribute (Read/Write)
- cfgLdapGroupAttribute (Read/Write)
- cfgLdapGroupAttributeIsDN (Read/Write)
- cfgLdapBinddn (Read/Write)
- cfgLdapBindpassword (Write only)
- cfgLdapSearchFilter (Read/Write)
- cfgLDAPCertValidationEnable (Read/Write)
- cfgLdapRoleGroup
- cfgStandardSchema
- cfgIpmiSol
- cfgIpmiLan
- cfgIpmiPetIpv6
- cfgIpmiPef
- cfgIpmiPet
- cfgUserDomain
- cfgServerPower
- cfgServerPowerStatus (Read Only)
- cfgServerPowerAllocation (Read Only)
- cfgServerActualPowerConsumption (Read Only)
- cfgServerPowerCapEnable (Read Only)
- cfgServerMinPowerCapacity (Read Only)
- cfgServerMaxPowerCapacity (Read Only)
- cfgServerPeakPowerConsumption (Read Only)
- cfgServerPeakPowerConsumptionTimestamp (Read Only)
- cfgServerPowerConsumptionClear (Write Only)
- cfgServerPowerCapWatts (Read/Write)
- cfgServerPowerCapBtuhr (Read/Write)
- cfgServerPowerCapPercent (Read/Write)
- cfgServerPowerLastMinAvg (Read Only)
- cfgServerPowerLastHourAvg (Read Only)
- cfgServerPowerLastDayAvg (Read Only)
- cfgServerPowerLastWeekAvg (Read Only)
- cfgServerPowerLastHourMinPower (Read Only)
- cfgServerPowerLastHourMinTime (Read Only)
- cfgServerPowerLastHourMaxPower (Read Only)
- cfgServerPowerLastHourMaxTime (Read Only)
- cfgServerPowerLastDayMinPower (Read Only)
- cfgServerPowerLastDayMinTime (Read Only)
- cfgServerPowerLastDayMaxPower (Read Only)
- cfgServerPowerLastDayMaxTime (Read Only)
- cfgServerPowerLastWeekMinPower (Read Only)
- cfgServerPowerLastWeekMinTime (Read Only)
- cfgServerPowerLastWeekMaxPower (Read Only)
- cfgServerPowerLastWeekMaxTime (Read Only)
- cfgServerPowerInstHeadroom (Read Only)
- cfgServerPowerPeakHeadroom (Read Only)
- cfgServerActualAmperageConsumption (Read Only)
- cfgServerPeakAmperage (Read Only)
- cfgServerPeakAmperageTimeStamp (Read Only)
- cfgServerCumulativePowerConsumption (Read Only)
- cfgServerCumulativePowerConsumptionTimeStamp (Read Only)
- cfgServerCumulativePowerClear (Write Only)
- cfgServerPeakPowerClear (Write Only)
- cfgServerPowerPCIeAllocation (Read/Write)
- cfgServerPowerSupply
- cfgIPv6LanNetworking
- cfgIPv6Enable (Read/Write)
- cfgIPv6Address1 (Read/Write)
- cfgIPv6Gateway (Read/Write)
- cfgIPv6PrefixLength (Read/Write)
- cfgIPv6AutoConfig (Read/Write)
- cfgIPv6LinkLocalAddress (Read Only)
- cfgIPv6Address2 (Read Only)
- cfgIPv6Address3 (Read Only)
- cfgIPv6Address4 (Read Only)
- cfgIPv6Address5 (Read Only)
- cfgIPv6Address6 (Read Only)
- cfgIPv6Address7 (Read Only)
- cfgIPv6Address8 (Read Only)
- cfgIPv6Address9 (Read Only)
- cfgIPv6Address10 (Read Only)
- cfgIPv6Address11 (Read Only)
- cfgIPv6Address12 (Read Only)
- cfgIPv6Address13 (Read Only)
- cfgIPv6Address14 (Read Only)
- cfgIPv6Address15 (Read Only)
- cfgIPv6DNSServersFromDHCP6 (Read/Write)
- cfgIPv6DNSServer1 (Read/Write)
- cfgIPv6DNSServer2 (Read/Write)
- cfgIPv6URL
- cfgIpmiSerial
- cfgIpmiSerialBaudRate (Read/Write)
- cfgIpmiSerialConnectionMode (Read/Write)
- cfgIpmiSerialChanPrivLimit (Read/Write)
- cfgIpmiSerialFlowControl (Read/Write)
- cfgIpmiSerialHandshakeControl (Read/Write)
- cfgIpmiSerialLineEdit (Read/Write)
- cfgIpmiSerialEchoControl (Read/Write)
- cfgIpmiSerialDeleteControl (Read/Write)
- cfgIpmiSerialNewLineSequence (Read/Write)
- cfgIpmiSerialInputNewLineSequence (Read/Write)
- cfgSmartCard
- cfgNetTuning
- cfgSensorRedundancy
- cfgVFlashSD
- cfgVFlashPartition
- Deprecated Commands, Groups, and Objects
- Index
- Contents
76 RACADM Subcommand Details
The vmdisconnect subcommand enables a iDRAC6 user to disconnect all
active Virtual Media sessions. The active Virtual Media sessions can be
displayed in the iDRAC6 Web-based interface or by using the RACADM
subcommands such as remoteimage or getssninfo.
vmkey
NOTE: To use this subcommand, you must have Access Virtual Media permission.
Synopsis
racadm vmkey <action>
If <action> is configured as reset, the vFlash memory is reset to the
default size of 256 MB and removes all data from it.
NOTE: This command is deprecated from iDRAC6 1.5 and iDRAC6 3.0 releases
onwards. The functionality of this command is now covered by vflashsd
initialize
. While execution of the vmkey reset command will be
successful, it is recommended to use the
vflashsd initialize
command. For more information, see "vflashsd" on page 72.
Description
When a custom Virtual Media key image is uploaded to the RAC, the key size
becomes the image size. The vmkey subcommand can be used to reset the
key back to its original default size, which is 256 MB on the iDRAC6.
Subcommand Description
vmkey Performs Virtual Media key-related operations.