Administrator Guide

RACADM Subcommand Details 75
• To display the emulation type:
racadm getconfig –g cfgvflashpartition –I 1 –o
cfgvflashpartitionemulatiotype
• To display the label for the partition that is visible to the operating system:
racadm getconfig –g cfgvflashpartition –i 1 –o
cfgvflashPartitionlabel
• To display the format type of the partition:
racadm getconfig –g cfgvflashpartition –i 1 –o
cfgvflashPartitionFormatType
• To change a read-only partition to read-write:
racadm config –g cfgvflashpartition –i 1 –o
cfgvflashPartitionAccessType 1
• To attach a partition to the host operating system:
racadm config –g cfgvflashpartition –i 1 –o
cfgvflashPartitionAttachState 1
vmdisconnect
NOTE: To use this subcommand, you must have Access Virtual Media permission.
Synopsis
racadm vmdisconnect
Description
The vmdisconnect subcommand allows a user to disconnect another user's
Virtual Media session. Once disconnected, the Web-based interface reflects
the correct connection status.
Subcommand Description
vmdisconnect Closes all open iDRAC6 Virtual Media connections from remote
clients.