Administrator Guide

144 iDRAC6 Property Database Group and Object Definitions
cfgServerPowerPCIeAllocation (Read/Write)
NOTE: This object is applicable for iDRAC6 Enterprise only for specific Blade
Servers and not for iDRAC6 on Rack and Tower Servers.
NOTE: You must have Administrator privileges to modify the value for this object.
cfgServerPowerSupply
This group contains information related to the power supplies. The following
sections provides information about the objects in the cfgServerPowerSupply
group.
NOTE: The cfgServerPowerSupply object group is applicable only for iDRAC6 on
Rack and Tower Servers and not for iDRAC6 Enterprise on Blade Servers.
NOTE: The getconfig subcommand will always show eight cfgServerPowerSupply
indexes, even if two power supplies are installed in the system or the system
supports a maximum of two power supply units. For the uninstalled and
unsupported units, all the objects in the cfgServerPowerSupply group displays a
value of 0.
cfgServerPowerSupplyIndex
NOTE: Indexes from 1 – 8 are supported to support up to 8 power supply units. If
any power supply unit is not present, cfgServerPowerSupplyOnlineStatus is absent
and for all the other properties, it is 0.
Description Amount of power allocated to the PCIe cards.
Legal Values 0W: For platforms that do not support PCIe cards.
100W - 500W: For platforms that support PCIe cards.
Default 0: For platforms that do not support PCIe cards.
500W: For platforms that support PCIe cards.
Description Index of the power supply unit.
Legal Values Integer from 1-8
Default No default value